Removing And Replacing The Card Guides; Figure 7-10, Card Guide Removal And Replacement - Racal Instruments 1261B User Manual

Removing and
Replacing The Card
Guides

Figure 7-10, Card Guide Removal and Replacement

Maintenance 7-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1. Ensure AC mains input (J400) is disconnected.
2. Insert flat blade screwdriver into fuse carrier slot
at F400 in power supply rear panel and rotate
counter clockwise to remove.
3. To replace fuse, insert the fuse carrier and fuse
assembly into fuse housing opening for F400 on
power supply.
4. Insert flat blade screwdriver into fuse carrier and
rotate clockwise to lock fuse assembly in place.
Complete the steps below while referring to Figure 7-10 to
remove and replace the card guides. The procedure applies to
top and bottom card guides.
1261B User Manual
Racal Instruments Ó 1995