Programming The Number Of Data Bits; Programming The Parity; Programming The Number Of Stop Bits - Racal Instruments 1261B User Manual

1261B User Manual
Programming The
Number of Data
Bits
Programming The
Parity
Programming The
Number of Stop
Bits
Racal Instruments Ó 1995
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The number of data bits may be programmed with the
command:
SYSTEM:COMM:SERIAL:BITS <data bits>
where "<data bits>" will either be 7 or 8.
programmed number of data bits may be read with the query:
SYSTEM:COMM:SERIAL:BITS?
The parity may be programmed using one of the following
commands:
SYSTEM:COMM:SERIAL:PARITY EVEN
SYSTEM:COMM:SERIAL:PARITY ODD
SYSTEM:COMM:SERIAL:PARITY NONE
The present parity may be read using the query:
SYSTEM:COMM:SERIAL:PARITY?
The EMS will reply to this query with one of the following:
EVEN
ODD
NONE
The number of data bits may be programmed with the
command:
SYSTEM:COMM:SERIAL:SBITS <stop bits>
where "<stop bits>" will either be 1 or 2.
programmed number of stop bits may be read with the query:
SYSTEM:COMM:SERIAL:SBITS?
Using The Enhanced Monitoring System 4-35
The presently
The presently