Descrambling Capability - Huawei IRD6000 User Manual

IRD6000
User Guide
Checking Configuration on the IRD6000 Side
Table 2-9 lists the configuration you need to check on the IRD6000 side.
Table 2-9 Configuration on the IRD6000 side
Item
Changing IRD6000's signal
reception method (from the
front panel)
Changing IRD6000's signal
reception method (from
the web interface)
Receiving signals
Verifying the Result
If the Lock indicator on the front panel turns steady green after the relevant settings are
configured, the signal reception is normal.

2.4.2 Descrambling Capability

Prerequisites




Checking Configuration on the IRD6000 Side
Table 2-10 lists the configuration you need to check on the IRD6000 side.
Table 2-10 Configuration on the IRD6000 side
Item
IRD6000 settings (from the
front panel)
Issue 02 (2012-12-05)
The signal source sends IP stream signals properly. The destination multicast or uni-cast
address and port are the values set in the IP board reception parameters.
Descrambled satellite signals or code streams
A CAM card supporting the CAS that scrambles the test signals
An authorized smart card
A monitor to view descrambled video
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Inspection Method
From the front panel, choose Inputs > Source, and select a
method matching the current signal source from Tuner,
ASI, or IPTV.
From the web interface, choose Main Board, and select a
method matching the current signal source from Tuner,
ASI, or IPTV.
Ensure that the IRD6000's ports receive signals properly.
 Tuner: connects the IRD6000's Tuner IN port using an
RF cable
 ASI: connects the IRD6000's ASI IN port using an ASI
cable
 IP: connects the IRD6000's TS IN/OUT port using a
network cable
Inspection Method
From the front panel, choose Outputs > Program Setup.
From the program list, select the program to descramble.
Select CI Slot1 or CI Slot2 based on the CI card
slot where the CAM resides.
2 Operation Instructions
32