Advertisement
2 INSTALLATION
2.1 Necessary tools
14 mm hexagon wrench
2.2 A95 Installation
1
Install the cylinders by carrying out the instruc-
tions indicated in the manual and positioning the
engines as shown in the pictures indicated in point 2.
NOTICE
Do not assemble the plugs on the cylinder body
(see the picture aside).
If the plugs are already mounted, it is necessary
to remove them.
2
Position the engines in the center of the stroke
observing any convergence or divergence recom-
mended by the engine manufacturers as shown in
the picture aside. (see the pictures below).
2x
22 mm hexagon wrench
i2
Installation and Maintenance Manual
Dynamometric wrench
Cross slot screwdriver
i/2
i/2
i
i3
page 9
-
TIE BAR A95
Loctite 270
of 19
Advertisement
