Advertisement
3 MAINTENANCE
3.1 Ordinary maintenance
WARNING
Poor installation and maintenance may result in loss of steering and cause property damage and/or personal injury.
1
After the first 10 working hours and afterwards periodically check that the bar is intact and that the connec-
tions are tightened.
2
Periodically wash the components with fresh water in order to remove any salt deposits.
DANGER
In case of disassembly of the self-locking nuts, they must be replaced. (please contact our technical service
department).
3.2 Extraordinary maintenance
For any information or for assistance with unusual applications please contact our technical support personnel
4 DISMANTLING
4.1 Dismantling
When for any reason, the system is put out of service, it is necessary to follow some rules in order to respect the
environment.
Sheaths, pipelines, plastic or non-metallic components must be disassembled and disposed of separately.
Technical service
(See paragraph "Introduction").
Installation and Maintenance Manual
-
TIE BAR A95
page 13
of 19
Advertisement
