Advertisement
1 PRODUCT DESCRIPTION
1.1 General features
The bar A95 is completely made up of stainless steel and it is already preassembled and ready to be installed. Its
length can be adjusted: the distance between centers varies from 660 (26'') to 812 mm (32'') and from 812 (32'')
to 950 mm (37.5'') according to the version (A95-32 and A95-37.5).
NOTICE
The distance between the centers is calculated between the centers of the holes located in the engine tiller arms.
WARNING
It can be used in applications with dual outboard engine and dual cylinder type UC130-SVS (or UC128-OBF and
UC128-SVS) for assembly from the front side.
WARNING
Before the installation check the assembly compatibility of tie bar A95 with your application.
WARNING
The A95 bar allows to tilt the engines independently.
CAUTION
In dual cylinder applications it is necessary to order a cylinder with idler arm mounted on the starboard and a
cylinder with idler arm mounted on the port.
1.1 Packaging contents
1. Preassembled bar
2. Bag with screws
page 8
of 19 -
TIE BAR A95
A95-32: 660-812mm (26"-32")
A95-37.5: 812-950 (32"-37.5")
Installation and Maintenance Manual
Advertisement
