Access The Screen Calibration Of A T2I Remote Control; Change Wifi Settings Of T2I, T2X, T3X, T4X Remote Controls; Reset The Battery Memory Of T2I, T2X, T3X, T4X Remote Controls; Access The Screen Calibration Mode Of A Kx2 Touchpanel - RTI T2i Technical Bulletin

F.

Access the Screen Calibration of a T2i Remote Control

On the Control Panel page press the following button sequence.
1. Guide
2. Menu
3. Guide
4. Menu
5. Channel Up
Tap the touch screen to leave the calibration mode.
G.

Change WiFi Settings of T2i, T2x, T3x, T4x Remote Controls

When making any changes to the WiFi settings of a remote, you need to power cycle the remote after
uploading your file in order to apply the new WiFi parameters to the remote's systems.
H.

Reset the Battery Memory of T2i, T2x, T3x, T4x Remote Controls

T2i, T2x, T3x, T4x battery memory can be reset as follow:
1. Flash the firmware
2. Remove & replace the battery
3. Charge for 24 hours
I.

Access the Screen Calibration Mode of a KX2 Touchpanel

Access the KX2 control panel by holding down the button located in the
lower right corner of the KX2 (default labelled with the power symbol),
while applying power or resetting the KX2. Then press the following
button sequence:
1. Top Left Button
2. Bottom Right Button
3. Top Left Button
4. Bottom Right Button
5. Top Right Button
Tips for Touchscreen
Remotes & Touchpanels
3 | P a g e
08/2020