Advertisement
Instructions for Conversion of Commercial Electric Models
Conversion Kits for Models E32-50S-3/80R-3/120R-3
1. Refer to Table 1 below that contains water heater KW, Element Wattage, Voltage, and kit part
numbers.
2. Locate the KW of the required water heater.
3. Move across the table (to the right) until you reach the required voltage.
4. Select the required kit number.
5. Use that kit for this conversion.
6. Refer to the remaining pages for a detailed conversion procedure.
Required
Total Water
Heater (KW)
6
9
12
13.5
15
18
These three element water heaters with surface mount thermostats have been factory wired with the
following common components; terminal block for max service wire size of 2 AWG, 3 elements each having
a surface mount thermostat with hi-limit control, two fuse blocks rated at 480 volts ac max, and 6 type G 30
amp fuses (rated at 480 volts max).
Table 1. Conversion Kit Table
Element
Wattage
208 volts
2000
265-43942-13
3000
265-43942-14
4000
265-43942-15
4500
265-43942-16
5000
265-43942-17
6000
265-43942-18*
*265-43942-18 will require control box replacement (included in kit).
Kit Part Numbers
240 volts
265-43942-07
265-43942-08
265-43942-09
265-43942-10
265-43942-11
265-43942-12
4
480 volts
265-43942-01
265-43942-02
265-43942-03
265-43942-04
265-43942-05
265-43942-06
Advertisement
