Multipurpose Application
• Make sure that the sticker on the connector of the board says "dv" (dual
voltage). This indicates that the board is compatible with Vacon 20CP/X.
See below:
3
• NOTE: Incompatible boards cannot be installed on Vacon 20CP/X. Compat-
ible boards have a slot coding that enable the placing of the board (see
above).
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Figure 2. Removing the option slot cover.
Slot coding
vacon • 8
9116.emf
1
Need help?
Do you have a question about the 20 CP/X and is the answer not in the manual?