Misuse And Modifications To The Instrument; In Case Of Malfunction; Rlds Fusing; Installation Category - Emerson GW-810-3760 Installation And Operation Manual

Refrigerant leak detection system
Table of Contents

Advertisement

1.3.6. Misuse and Modifications to
the Instrument
The protection provided by the monitor may be
impaired if the monitor is used in a manner not
specified by Emerson. Modifications to this monitor,
not expressly approved, will void the warranty.

1.3.7. In Case of Malfunction

Do not continue to use this equipment if there are any
symptoms of malfunction or failure. In the case of
such occurrence, de-energize the power supply and
contact a qualified repair technician or the nearest
Service Center. ONLY the provided knockouts are to
be used for electrical and communication wiring.
Drilling into the box will void the warranty.

1.3.8. RLDS Fusing

F1, F2
Table 1-1 - Fusing Requirements

1.3.9. Installation Category

Installation Category II, Pollution Degree II, as
defined by UL.

1.3.10. Altitude Limit

RLDS
6,562 ft (2,000 m)

1.3.11. Cleaning

If, during period maintenance inspection it
becomes necessary to clean the outside of the case,
use a DRY CLOTH. To avoid shock hazard and/or
equipment damage, DO NOT USE SOAP AND
WATER.
2 • RLDS I&O Manual
1AMP, 250VAC
FAST ACTING
(Type "F")
1.4. Warning and Caution
Conventions
When used in this manual or as labeled on the gas
monitor, the following hazard symbols and/or
associated words are defined as follows.

1.4.1. Warning

This symbol and/or the use of the word WARNING
indicates a potential hazard from electrical shock
associated with the use of this equipment. It calls
attention to a procedure, practice, condition, or the
like, which if not correctly performed or adhered to,
could result in death or serious injury.
WARNING:

1.4.2. Caution

This symbol and/or use of the word CAUTION in
this manual denotes a potential hazard associated with
the use of this equipment. It calls attention to a
procedure, practice, condition, or the like, which if
not correctly performed or adhered to, could result in
minor or moderate bodily injury, and damage to the
equipment.
CAUTION:

1.4.3. Important

The use of the word IMPORTANT in this manual
calls attention to a procedure, practice, condition, or
the like, which if not correctly performed or adhered
to, could result in incorrect performance of or damage
to the equipment and may void the warranty.
IMPORTANT:
026-1309 Rev 11

Advertisement

Table of Contents
loading

Table of Contents