FiT FLYER Instructions Manual page 199

Declaration of
conformity
EC Declaration of Conformity
Not .applicable .to: .
• models .requiring .authorisation .
• models with a maximum speed greater than
25 km/h
• models with a continuous rated power greater
than 250 watts
The manufacturer
Biketec . A G
Schwende 1
4950 .Huttwil, .Switzerland
Telephone .+41 .(0) .62 .959 .55 .55
hereby declares that the following products:
Product name:
FLYER .EPAC .(Electrically .Power . A ssisted .Cycle)
Type designation
C . SERIES, .T . SERIES, . RS . SERIES, .TS . SERIES, .
TX .SERIES, .B .SERIES, .U .SERIES, .FLOGO, .PLU-
TO, .UPROC
comply .with .all .relevant .provisions .of .the .Machin-
ery .Directive .(2006/42/EC).
The machine also complies with all provisions of
the Directive
Electromagnetic Compatibility 2004/108/EC
and . t he . L ow-Voltage . D irective .(2006/95/EC) .(only .
the .charger).
The following standards are applied:
EN .15194:2009+A1:2011 .
Technical documentation available from:
Biketec . A G
Ivica .Durdevic
Schwende 1
4950 .Huttwil, .Switzerland
Huttwil, .May .2016
For .Biketec . A G:
Andreas .Kessler .
CEO
Ivica .Durdevic
CTO
Legal disclosure
Party responsible for content and illustrations
Biketec . A G
Schwende 1
4950 .Huttwil, .Switzerland
Telephone .+41 .62 .959 .55 .55
© The copying, reproduction and translation or
any use for commercial purposes (including ex-
tracts and in either printed or electronic form) are
only permitted with the prior written approval of
Biketec . A G.
Please note that all instructions may be altered for
the .purpose .of .improvement .without .prior .notice. .
Regular .technical .updates .may .be .found .on .www.
FLYER-bikes.com.
FLYER .EN .1st .edition .| .
47
EN