Technical Data - Hilti TE 706 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14

4. Technical data

Power tool
Rated power input
Rated voltage
Rated current
Mains frequency
Weight as per EPTA-Procedure
01/2003
Dimensions (L × W × H)
Chuck
Hammering speed under load
Single impact energy
Chiseling performance in
medium-hard concrete
Double insulated (in accordance
with EN 60745)
-NOTE-
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assess-
ment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted sound power level:
Typical A-weighted sound pressure level:
For the given sound power level as per EN 60745, the tolerance is 3 dB.
Wear ear protection!
Triaxial vibration value (vibration vector sum)
measured in accordance with EN 60745-2-6
Chiselling, (a
):
h, Cheq
Uncertainty (K) for triaxial vibration value
Right of technical changes reserved.
Printed: 08.07.2013 | Doc-Nr: PUB / 5071188 / 000 / 01
TE 706 / TE 706-AVR
1200 W
1200 W
1180 W
120 V
100 V
110 V
12.3 A
11.1 A
9.9 A
50–60 Hz
7.9 kg
560 × 125 × 250 mm
TE-Y (SDSmax)
2760 blows/min
6–10 joules
750 cm
3
/min
Protection class II Z
TE 706
TE 706-AVR
TE 706
TE 706-AVR
TE 706
TE 706-AVR
1180 W
1200 W
1200 W
127 V
220 V
230 V
9.3 A
9.0 A
101 dB (A)
98 dB (A)
90 dB (A)
87 dB (A)
9.0 m/s
2
5.5 m/s
2
1.5 m/s
2
1200 W
240 V
8.6 A
8.7 A
en
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Te 706-avr

Table of Contents