22
• Adjusting the output tray for document length
- Open the output tray extension to accommodate longer documents.
- With the output tray extended, lift the output tray to engage the height
adjustment tab. This position will enable a more uniform stack of
documents.
NOTE: It is recommended that you use a document extender if you are
scanning documents longer than 17 inches (43.2 cm). See page 60 for
a link containing available Supplies and Consumables.
• Document weights — the input elevator is capable of holding the
approximate weight of 300 sheets of plain 20# bond paper.
A-61916 August 2019