Bettis Reference Materials; Service Support Items - Emerson Bettis G01 Series Installation, Operation And Maintenance Manual

Installation, Operation and Maintenance Manual
VA-DC-000-1803 Rev. 2
1.4

Bettis Reference Materials

1.4.1
1.4.2
NOTE:
If you require a specific assembly drawing (IE: GXX-M3 OR HYD) please contact Emerson
Valve Automation Bettis by phone or email at Info.Bettis@EmersonProcess.com.
1.5

Service Support Items

1.5.1
1.5.2
NOTE:
These tools are required only when extension rod assembly (1 - 50) or (9 - 50) is removed or
when a new extension rod assembly is installed.
Table 1.
1.5.3
1.5.4
Introduction
Assembly Drawing for G01-M18 through G10-M18 Double-Acting with
one Pneumatic Power Module and one Hydraulic Override Module use
part number VA115680.
M18 Manual Hydraulic Override System operating instructions part
number VA-DC-000-1879 with M18 Assembly Drawing part number
VA-ED-005-1120.
Bettis module service kits.
For rod extension retainer nut tool part number, refer to the following Table.
G-Series Actuator Models
Actuator Model
G01
G2
G3/G4
G5/G7
G8/G10
Commercial leak testing solution.
Non-hardening thread sealant.
Section 1: Introduction
Bettis Part Number
None required
123616
117370
117369
117368
July 2020
3