Safety Regulations; Layout And Items Supplied - EINHELL 43.106.25 Operating Instructions Manual

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
•
The slide is suitable for use with the bench-
type circular saws recommended by the
manufacturer.
•
When using this slide you must also follow
the original operating instructions and safety
information issued for the bench-type circular
saw used with it.

2. Layout and items supplied

2.1 Layout (Fig. 1-2)
100. Slide plate with scale
101. Stop rail
102. Guide rail
103. Angle (rear)
104. Clamping lever for angle setting
105. Angle (front)
106. Strut (rear)
107. Strut (front)
108. Hex screw M10 x 65
109. Washer 8mm
110. Spacer ring (plastic)
111. Allen screw (long)
112. Allen screw (short)
113. Button
114. Spring washer
115. Profi le
116. Nut size M8, self-locking
117. Washer 6 mm (large)
Anl_Schiebeschlitten_SPK7.indb 13 Anl_Schiebeschlitten_SPK7.indb 13
GB
118. Hex screw (M8 x 16)
119. Hex screw (M6 x 16)
120. Nut size M6, self-locking
121. Nut size M8, self-locking (plastic lock)
122. Washer 10 mm
123. Washer 8 mm, small
124. Washer 6mm, small
2.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Slide plate with scale
•
Stop rail
•
Guide rail
•
Angle (rear)
•
Clamping lever for angle setting
•
Angle (front)
•
Strut (rear)
•
Strut (front)
•
Hex screw (M10 x 65)
•
Washer 8 mm (2x)
•
Spacer ring (plastic), 2x
•
Allen screw, long, 2x
•
Allen screw, short, 8x
•
Button, 2x
•
Spring washer
•
Profile
•
Nut size M8, self-locking, 2x
•
Washer 6 mm, large, 4x
•
Hex screw M8 x 16, 2x
•
Hex screw M6 x 16, 4x
•
Nut size M6, self-locking, 8x
•
Nut size M8, self-locking (plastic lock)
•
Washer 10 mm
•
Washer 8 mm, small, 2x
•
Washer 6 mm, small, 12x
•
Original operating instructions
- 13 -
29.04.14 17:06 29.04.14 17:06