Washing Programmes - Electrolux ESF 45030 User Manual

32 electrolux
• Close the appliance door.
– The washing programme continues
from the point of interruption.
Select and start a washing programme
with delay start
1. Close the door.
2. Select a washing programme.
3. Press the delay start button again and
again until the display shows the neces-
sary number of hours for the delay
start .
4. Press the start/cancel button. The
countdown starts automatically.
– When the countdown is completed,
the washing programme starts auto-
matically.
The opening of the appliance door in-
terrupts the countdown. When you
close the door, the countdown contin-
ues from the point of interruption.
How to cancel a washing programme
or a delay start
If a washing programme or a delay
start has not started, you can change
the selection.
When a washing programme or a delay
start are in progress, it is not possible
to change the selection. It is necessary
to cancel the washing programme or
the delay start to make a new selec-
tion.
How to cancel a washing programme
1. Press and hold the start/cancel button
until in the display flashes the time dura-
tion of the washing programme.
2. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.

WASHING PROGRAMMES

Programme
1)
2)
Type of soil
All Crockery, cutlery,
pots and pans
Fresh soil Crockery and cutlery
How to cancel a delay start
1. Press and hold the start/cancel button
until the display shows the time duration
of programme.
2. Press the start/cancel button to start the
washing programme.
End of the washing programme
The display shows a zero and the phase in-
dicators are off when the washing pro-
gramme is completed.
1. Deactivate the appliance.
2. Open the appliance door.
3. For better drying results, keep the door
ajar for some minutes.
If you do not deactivate the appliance
at the end of the washing programme,
the appliance stays on standby.
• To decrease energy consumption
during the standby, after three mi-
nutes from the end of the washing
programme:
– All indicators go off
– The display shows one horizontal
bar.
Press one of the buttons, the display
and the indicators come on again.
Remove the items from the baskets
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
Type of load
Prewash
Wash 45 °C or 70 °C
Rinses
Dry
Wash 60 °C
Rinse
Programme description