1) Connect the water inlet hose to a water tap with 3/4" thread.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,
photovoltaic panels and aeolian), use a
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
Installation under a counter
Put the appliance adjacent to a water tap
and a water drain.
Remove the appliance worktop to install it
under a sink unit or a kitchen worktop.
Make sure that the dimensions of the re-
cess agree with the dimensions in the pic-
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it.
How to remove the appliance worktop
1. Remove the rear screws (1).
2. Pull the worktop from the behind of the
3. Lift the worktop and move it from the
4. Use the adjustable feet to adjust the lev-
5. Install the appliance under the kitchen
hot water supply to decrease energy
front slots (3).
el of the appliance.
worktop. Do not squash or bend the
water hoses during the installation.