Mounting The Switch On A Rack - ZyXEL Communications GS1100-16 User Manual
16 port unmanaged gigabit ethernet switch
Hide thumbs
Also See for GS1100-16:
- User manual (24 pages) ,
- Specifications (2 pages) ,
- Quick manual (2 pages)
Table of Contents
Advertisement
2.3.3 Mounting the Switch on a Rack
Position a mounting bracket (that is already attached to the Switch) on one side of
1
the rack, lining up the two screw holes on the bracket with the screw holes on the
side of the rack.
Figure 7 Mounting the Switch on a Rack
Using a #2 Philips screwdriver, install the M5 flat head screws through the
2
mounting bracket holes into the rack.
Repeat steps
3
the rack.
GS1100-16 User's Guide
1
and
2
to attach the second mounting bracket on the other side of
Chapter 2 Hardware Description and Connection
11
Hide quick links:
Advertisement
Table of Contents
