Mounting The Switch On A Rack - ZyXEL Communications GS1100-8HP User Manual

Figure 12 Attaching the Mounting Brackets (GS1100-16 and GS1100-24E)
Figure 13 Attaching the Mounting Brackets (GS1100-24)
Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes
2
into the Switch.
Repeat steps
3
You may now mount the Switch on a rack. Proceed to the next section.
4

2.3.3 Mounting the Switch on a Rack

Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining
1
up the two screw holes on the bracket with the screw holes on the side of the rack.
Chapter 2 Hardware Description and Connection
1 and 2 to install the second mounting bracket on the other side of the Switch.
GS1100 Series User's Guide
16