Advertisement
Quick Links
Advertisement
Related Manuals for Rev-A-Shelf 5708
Summary of Contents for Rev-A-Shelf 5708
- Page 1 Long Short...
- Page 2 3 of the M4 x 18mm 16” wood screws (See Fig2). Adjustable Bracket should sit ADJUSTABLE flush with the back of the face BRACKET frame or ¾” back from the front of a frameless cabinet wall. ” Customer Service: 800-626-1126 | rev-a-shelf.com...
-
Page 3: Connector Bracket
Bracket (See Fig 4). CROSS BOLTS Once you have adjusted the Swivel Frame, use 2 of the M4x18mm wood screws to secure the Swivel Frame to the cabinet floor (See Fig 4). 2 M4X18MM WOOD SCREWS INSTALLATION INSTRUCTIONS: 5708 ABOVE THE APPLIANCE ORGANIZER... - Page 4 Support Arm under the slotted portion of the Connector, re-attach the black bumper pieces with the removed screw from the beginning of this step and secure. (See Fig 6B) BUMPER M5x8MM BUMPER PIECES SCREW PIECES Customer Service: 800-626-1126 | rev-a-shelf.com...
- Page 5 LONGER ADDITIONAL TOP BRACKETS HAVE BEEN PROVIDED FOR TALLER DOOR APPLICATIONS.
- Page 6 Stopper Screw in front of the black bumper, underneath the Connector’s slot (See Fig 10). Place the remaining two pieces on top of the Connector and secure with the removed screw. STOPPER SCREW ASSEMBLY Customer Service: 800-626-1126 | rev-a-shelf.com...
- Page 7 SIDE TO SIDE Adjust as needed to fit the ADJUSTMENTS door to your cabinet. (See Figure 12) LEFT/RIGHT TILT ADJUSTMENT SCREWS 4 VERTICAL ADJUSTMENT SCREWS SIDE TO SIDE ADJUSTMENTS INSTALLATION INSTRUCTIONS: 5708 ABOVE THE APPLIANCE ORGANIZER...
- Page 8 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 Customer Service: 800-626-1126 | rev-a-shelf.com...
- Page 9 Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 INSTRUCCIONES DE INSTALACIÓN INSTRUCCIONES EN VIDEO: WWW.REV-A-SHELF.COM/VIDEOS INSTRUCTIONS D’INSTALLATION VIDÉO DES INSTRUCTIONS: WWW.REV-A-SHELF.COM/VIDEOS ORGANIZADOR SUPERIOR PARA ELECTRODOMÉSTICOS ORGANISATEUR 5708 AU-DESSUS DES APPAREILS Component Description Wire Basket Door frame Swivel frame Adjustable Side Bracket Connecter...
- Page 10 à bois M4 x 18mm (voir l’Illustration 2). Le support réglable doit être à ras de l’arrière du cadrage avant ou à ¾” (1.9cm) de l’avant de la paroi d’une armoire sans cadre. Servicio al Cliente/Service client: 800-626-1126 | rev-a-shelf.com...
- Page 11 PASO 1/ÉTAPE 1 Jale el marco giratorio en la FIGURA 3 posición abierta. Utilizando ILLUSTRATION 3 dos tornillos M5x8mm, sujete el conector del soporte al marco giratorio a través de las ubicaciones de los orificios ilustrados en la figura 3. Tirez le cadre pivotant en position ouverte.
- Page 12 étape et fixez. (Voir l’Illustration 6B). TOPES TORNILLO DE PIÈCES DU BUTOIR TOPES M5X8MM PIÈCES DU BUTOIR VIS M5X8MM Servicio al Cliente/Service client: 800-626-1126 | rev-a-shelf.com...
- Page 13 SUJETANDO LA PUERTA DEL GABINETE FIGURA 7 FIXER LA PORTE DE L’ARMOIRE ILLUSTRATION 7 PASO 7/ÉTAPE 7 Refiérase a la figura 7 para las dimensiones de la perforación. 10-3/4” Una vez que usted haya marcado 1/2” las ubicaciones de los orificios, pre taladre orificios piloto asegurándose de no taladrar a través del frente de la puerta del...
- Page 14 Connecteur (voir l’Illustration 10). Placez les deux morceaux restants sur le dessus du connecteur et fixez avec la vis retirée. ENSAMBLADO DEL TOPE DEL TORNILLO ASSEMBLAGE DE LA VIS DU BUTOIR Servicio al Cliente/Service client: 800-626-1126 | rev-a-shelf.com...
- Page 15 PASO 11/ÉTAPE 11 FIGURA 11 ILLUSTRATION 11 Cuelgue la canasta de alambre en los ganchos inferiores (ver la figura 11). Cuelgue la canasta del segundo alambre hacia abajo desde la parte superior. Suspendez le panier en fil métallique sur les crochets du bas (voir l’Illustration 11).
- Page 16 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 Servicio al Cliente/Service client: 800-626-1126 | rev-a-shelf.com...