Advertisement
5.2 Decoder Panel
1
4
5
6
Items
Name
1
POWER
2
STATUS
3
RESET
4
RS-232
5
DEBUG
6
AUDIO OUT
7
HDMI OUT
8
CHANNEL
9
LAN(POE)
10
DC 12V
2
7
Description
System power status LED
System working status LED
One second period flickering means product working normally.
Always on means system worked abnormally, this time you
need to reset product by pressing reset button on the front
panel or plugging power supply on the rear panel (you need
plug CAT cable if product is using POE for power supply).
System reset button.
Short pressing (<5 seconds) will reset product.
Long pressing (over 5 seconds) will let product enter firmware
upgrade mode.
Connect third-party control system to control this product
utilizing our API commands or control other devices be
connected to our products (including encoders and decoders)
via RS-232 port (this is called RS-232 pass-through).
System debug port
Analog stereo audio output
HDMI output port, connect to HDMI display device
Reserved use
Connects with Hub or router for receiving data to encoder.
Connects with 12V/1A power adapter supplied in the package
or doesn't need this if an IP switcher/router/hub with POE
feature be connected.
5 / 15
3
8
9
10
Advertisement
