Table of Contents
Advertisement
Connect multiple Processors as daisy chain
2.1.2.
2.1.2.1.
Since the default IP address of each processor is the same, users need to change the IP addresses of these
devices to avoid IP conflict.
3) Please give a unique IP address for each device in the same system.
e.g.
Device 1
Device 2
2.1.2.2.
Daisy chain all the units via dual RJ45 ports and connect to the control PC for command and control.
Set Up unique IP address for each processor
1)
IP address: 192.168.1.25 to set up the connection between
device and control PC.
2)
right click the Device Name and then choose Change
Device IP Address to open the 'Change Device IP Address'
dialog window.
192.168.1.25
192.168.1.26
Daisy chain units with CAT cables
Users need to connect the one by one using default
Make sure the device has been connected and then
Device 3
192.168.1.27
Device 4
192.168.1.28
Advertisement
Table of Contents
