2.Management software
There are three main groups of tools in this software to help users design a creative video wall layout. Device,
Output and Input
Device
2.1.
Users are able to configure devices and connect the devices to control PC in this section.
Connect
2.1.1.
The default IP address is 192.168.1.25. Users need to change the IP address of control PC to the same
IP group of this processor.
Open the 'Ethernet Properties' windows on Control PC
Highlight the TCP/IPv4 in Networking and click the Properties button to open the TCP/IPv4
Properties window
Change the 'Obtain an IP address automatically' to 'Use the following IP address to set up
a static IP address
IP address: any address between 192.168.1.1 and 192.168.1.255 except the
address which has been taken by the processor
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.1