Table of Contents
Advertisement
2.3.1.6. Change EDID
After the EDID having been changed, users need to disconnect and connect the input to the G4K
Pro in order to apply the change.
2.3.1.7. Check input resolution
Users are able to check the input video resolution in the management software
2.3.1.8. Source test mode
It will apply an image or video onto layout in the software to indicate the crop images for each
screen of the video wall.
Users are able to change the input EDID of G4K Pro to
match any shape of video wall layout. Go into 'Input'
and then right click on the device needed EDID change
and choose 'Change EDID' in drop down menu. The
default path for EDID files are C:\G4KPro\Edid
If the EDID needed is not in the folder, users are able
to customise the EDID using EDID Editor (3.4.5)
Advertisement
Table of Contents
