Table of Contents
Advertisement
Tool Bar
2.4.
Layout
2.4.1.
Right click onto each layout to Save new layout, Call,
Modify or Delete existing layouts
F
2.4.2.
Press this button to open firmware update dialog window
Select the firmware file (.zip file)
Make sure the IP address is the same address as the unit which needs to be updated
Please update .bin file first and then .bit file
V
2.4.3.
It shows the firmware version of all the processors which are connected to the software.
H
2.4.4.
Centre the layout to the grid area.
M
2.4.5.
Show the length and width of the video wall layout
D
2.4.6.
When move the display, it will snap to the next display.
G
2.4.7.
When move the display, it will snap to the next grid.
pre-set layouts saved on device
Firmware update
Version of firmware of devices
Home
Show Measurements
Snap to Display
Snap to Grid
Users are able to save up to 4 pre-set layouts here
and the layouts can be loaded by the
management software or 3rd party controller via
telnet.
Advertisement
Table of Contents
