Table of Contents
Advertisement
5. Change the H Active Pxl and V Active Lines to the required resolution setting
and save it.
6. Change the Pixel Clk to:
(H Active Pxl + HBlank) x (V Active Lines + V Blank) x required frame rate 10
and save it
7. The new EDID is ready for users to load onto processors.
Save as
2.4.9.
Save the current video wall layout onto the control PC.
Note:
please be aware the difference between layouts here and layouts in 3.4.1
Load Layout
2.4.10.
Load the pre-set video wall layout from control PC.
Language
2.4.11.
Change the language of the software.
6
Advertisement
Table of Contents
