Product Specifications - ZyXEL Communications ES-1124 User Manual

General
Standards
Uplink Interface
Interface
Data Transfer Rate
Network Cables
Full/Half Duplex
Media Interface
Exchange
Performance and Management
Back plane
Packet Forwarding
Rate
Switching Method
MAC Address Table

Product Specifications

This section provides the specifications of the switch.
PRODUCT SPECIFICATIONS
IEEE802.3 10BASE-T Ethernet (twisted-pair copper)
IEEE802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
IEEE802.3ab 1000BASE-T
IEEE802.3z Gigabit fiber
ANSI/IEEE802.3 Auto-negotiation
IEEE802.3x Flow Control
2 1000Base-T RJ-45 connectors
2 mini-GBIC ports (shared with 1000Base-T)
24 10/100M Ethernet Ports
Auto-crossover
Compliant with IEEE 802.3/3u
Back pressure flow control for half duplex
Flow control for full duplex (IEEE 802.3x)
Connector: RJ-45
Ethernet: 10Mbps(half duplex)
20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex)
200Mbps(full duplex)
10BASE-T: UTP Cat.3, 4, 5 (100 m) EIA/TIA-586 100-ohm STP
(100 m)
100BASE-TX: UTP Cat.5 (100 m max.) EIA/TIA-568 100-ohm
STP (100 m max.)
1000BASE-TX: UTP Cat.5 (100 m max.) EIA/TIA-568 100-ohm
STP (100 m max.)
Full/Half duplex for 10/100Mbps speeds
All ports support auto-crossover
Non-Blocking full wire speed forwarding rate 8.8Gbps
14880PPS for 10BASE-T
148800PPS for 100BASE-TX
Store-and-forward
8K Mac with Auto Learning
Dimension ES-1124 Ethernet Switch
Product Specifications
A