Chapter 2 Hardware Description And Installation; Desktop Installation; Figure 2-1 Attaching Rubber Feet - ZyXEL Communications ES-1124 User Manual

Hardware Description and Installation
This section shows two switch installations, describes the hardware of the
The switch is suitable for an office environment where it can be rack mounted on
standard EIA racks or as a standalone.
For proper ventilation, allow at least 4 inches (10 cm) of clearance
at the front and 3.4 inches (8 cm) at the back of the switch. This is
especially important for enclosed rack installations.
2.1

Desktop Installation

Make sure the switch is clean and dry.
Step 1.
Set the switch on a smooth, leveled and sturdy flat space strong enough to
Step 2.
support the weight of the switch and the connected cables. Make sure there is
a power outlet nearby.
Make sure there is enough clearance around the switch to allow air
Step 3.
circulation and the attachment of cables and the power cord.
Remove the adhesive backing from the supplied rubber feet.
Step 4.
Attach the rubber feet to each corner on the bottom of the switch. These
Step 5.
rubber feet help protect the switch from shock or vibration and ensure space
between devices when stacking.
Hardware Description and Installation
switch and gives a functional overview of the switch.

Figure 2-1 Attaching Rubber Feet

Dimension ES-1124 Ethernet Switch
Chapter 2
2-1