Cleaning; Repairs; Troubleshooting - BOMANN GT 357 Instruction Manual

• The device should be defrosted regularly.
• The seal of the device lid must be completely intact, so that the lid closes properly.
WARNING: WARNI WARNI WARNI NG: NG: NG:
• Always turn off the device and disconnect the plug or turn off / unscrew the fuse before cleaning
and user maintenance.
• Do not use steam cleaners for cleaning the device; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage the plastic parts. The device must be dry before Risk of electric shock!
Risk of electric shock! Risk of electric shock!
restarting operation.
CAUTION: : : : CAUTION
CAUTION CAUTION
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Essential oils and organic solvents, such as the juice of lemon or orange skin, butanoic acid or
cleaning agents containing acetic acid can damage plastic parts. Prevent contact of any part with
such substances.
• Do not bend the cooling coils.
For hygienic reasons, clean the interior and accessory parts regularly: For hygienic reasons, clean the interior and accessory parts regularly: For hygienic reasons, clean the interior and accessory parts regularly: For hygienic reasons, clean the interior and accessory parts regularly:
• Remove all food and keep covered at a cool location.
• Use warm water and a mild detergent for cleaning the interior (including rear side and bottom).
• Clean the water discharge channel and opening carefully with a pipe cleaner or knitting needle.
• After everything was thoroughly dried, you can restart the operation.
A wrong or improperly performed repair brings danger to the user.
Repairs to electrical appliances must only be carried out by an authorized specialist. A damaged pow-
er cord must be changed only by a qualified electrician.
Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist
You need the service may not call if you read this troubleshooting table.
Problem Problem Possible cause Possible cause
Problem Problem Possible cause Possible cause
The device is not - Is the unit not connected to mains
working properly
or at all. - Is the temperature control properly
- Is the place unqualified?

Troubleshooting

Troubleshooting Troubleshooting Troubleshooting
power?
set?

Cleaning

Cleaning
Cleaning Cleaning

Repairs

Repairs
Repairs Repairs
Solution Solution
Solution Solution
- Insert the plug properly in the contact
socket. Check the fuse.
- Check the temperature setting.
- Check the ambient temperature.
24