Tips For Energy Saving - BOMANN GT 357 Instruction Manual

Defrosting Defrosting
Defrosting Defrosting
To achieve better cooling and to save energy, defrost the device regularly. To start the defrosting pro-
cess turn the temperature control to the AUS
Remove the food items and keep covered at a cool location.
Open the water discharge channel at the device bottom and the water discharge opening at the device
front. Place a drip tray under in order to catch leaking water. When the ice has melted, wipe the con-
densate away and dry the device interior. You may then restart the device by connecting the plug and
turning the temperature control.
CAUTION: : : : CAUTION CAUTION CAUTION
Never use metal objects (e.g. knives) for removing ice from the vaporizer. The vaporizer could be
damaged. A defect vaporizer could cause serious damages.
NOTE: NOTE: NOTE: NOTE:
In order to speed up the defrosting process, make use of the included ice scraper.
Operating noise Operating noise Operating noise Operating noise
Type of sound Type of sound Type of sound Type of sound
Normal Normal Normal Normal Mumbling
noise noise noise noise
Liquid sounds
Click sounds
Disturbing noises
Turning off Turning off Turning off Turning off
Turn the temperature control Turn the temperature Turn the temperature Turn the temperature
If the device will not be operated for a longer period of time:
• Remove the entire food from the device.
• Turn the temperature control to the AUS
• Disconnect the plug or turn off / unscrew the fuse.
• Thoroughly clean the device (see "Cleaning").
• Keep the device lid open in order to prevent bad odors.
• Disconnect the plug if you do not use the device.
• Do not install the device near stoves, heaters or other heat sources. In case of higher ambient
temperatures, the compressor will run more frequently and longer.
• Ensure sufficient ventilation at the bottom and rear device side. Never block ventilation openings.
• Allow warm dishes to cool down before putting them in the device.
• Do not open the lid longer than necessary.
• Make sure that the temperature in the freezer does not rise above -18°C.
AUS AUS AUS-position and disconnect the plug or turn off the fuse.
Cause / solution Cause / solution Cause / solution Cause / solution
Caused by the compressor during its operation.
This is stronger when it turns on or off.
Caused by the circulation of the refrigerant in the device.
The temperature control turns the compressor on or off.
Vibration of the shelves or cooling coils – check if those are
securely fastened.
control control to to to to the control the the the AUS AUS AUS AUS- - - - setting setting in order to turn off the device. setting setting
AUS-setting.
AUS AUS
Tips Tips for E
Tips Tips
in order to turn off the device. in order to turn off the device. in order to turn off the device.
for Energy sav nergy saving ing
for E for E nergy sav nergy sav ing ing
23