Mitsubishi FR-A800 Series Manual page 78

7.2.6 Inverter FR-A800-GF
Inverter FR-A800-GF Communication Settings
Operation mode selection
Communication startup mode selection
Network No.(CC-Link IE)
Station No. (CC-Link IE)
NET mode command source selection
PU mode command source selection
Set the parameters above from the operation panel (FR-DU08) or FR Configurator2.
After the settings, the inverter will start with the NET operation mode when the power is on (reset). To
change parameters, etc. via GOT, switch the inverter to the NET operation mode.
Pressing the
7.2.7 Screen Data
7.2.7.1 W-12010 Station Number Switching Window Screen
Apply the following settings to the switches in W-12010 Station Number Switching Window.
(1) Open the [Station No. Switching] under [Action List] and change the network No. to "2".
(2) Change the [Constant] of the [Lamp] function to network No. 2.*1.
Item
key on the inverter body switches between the NET and PU operation modes.
Change to the Network No.2.
Parameter
Pr.79
Pr.340
Pr.434
Pr.435
Pr.550
Pr.551
78/83
Set Value
0
10
2
1
9999
2
Change the Network No. to "2".
BCN-P5999-1045-1a