HIKVISION Ultra Series Quick Start Manual page 32

Connect the video out interface of the camera to the installation
2.
display device.
Adjust zoom and focus.
3.
For certain camera models, zoom and focus must be

manually adjusted via zoom/focus lever according to the
image on the display device.
Note:
For the camera equipped with the auto iris, it is suggested
you change the iris mode to manual from the camera
menu (accessed via web browser), and re-change it back to
auto iris after you adjust the focus by the focus lever.
For camera equipped with a motor-driven lens, adjust the

zoom and focus on PTZ control panel by visiting the
camera via web browser or client software.
(Optional) For the camera supports ABF, you can adjust the focus
4.
manually, or click the ABF button on the rear panel of the camera
to adjust the focus automatically.
Network Box Camera·Quick Start Guide
31