1 Use a telephone wire to connect the P-870M-I DSL port to
the DSL (or MODEM) port on a splitter. If you do not have
a splitter, connect the DSL port directly to the telephone
jack.
2 Use an Ethernet cable to connect the P-870M-I
ETHERNET port to the computer.
3 Use the included power adaptor to connect the P-870M-I
POWER socket to an appropriate power source.
4 After you've made these connections, push in the power
button.
If the POWER, ETHERNET, and VDSL lights are on (or
blinking), you have set up the P-870M-I correctly. Test your
Internet connection by visiting
another web site).
If the lights behave differently or if you cannot connect to the
Web site, make sure the connections are correct. If the lights
are still different, turn off the device, wait a few seconds, and
turn it on again. If the problem continues, contact your local
vendor.
P-870M-Ix Series User's Guide
http://www.zyxel.com
3
(or