Specifications - ZyXEL Communications VDSL2 Modem P-870M-I Series User Manual

2 Drill two holes for the screws (M3*10). The centers of the
holes should be 108 mm apart.
Note: Be careful to avoid damaging pipes or cables inside
the wall when drilling holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a
small gap of about 0.5 cm between the heads of the
screws and the wall.
4 Make sure the screws can hold the weight of the P-870M-I
with the connection cables.
5 Align the holes on the back of the P-870M-I with the
screws on the wall. Hang the P-870M-I on the screws.

4 Specifications

Values are accurate at the time of writing.
Table 1 Device Specifications
Feature
DSL Port
ETHERNET Port
Power Supply
Power Consumption
P-870M-Ix Series User's Guide
Specification
(P-870M-I1) RJ11 connector for POTS
(P-870M-I3) RJ-45 connector for ISDN
RJ-45 connector
10/100 Mbps
Auto-sensing, auto-cross-over MDI/ MDI-X
AC 9 V, 1 A
7 W
5