Prestige 941 Cable Router
7.8
Command Interpreter Mode
This option allows you to enter the command interpreter mode. A list of valid commands can be found by
typing [help] or [?] at the command prompt. For more detailed information, check the ZyXEL web site or
send an e-mail to the ZyXEL Support Group.
Copyright (c) 1994 - 1999 ZyXEL Communications Corp.
7.9
Boot Commands
In Debug mode, enter ATHE to view the Prestige boot module commands as shown next and then enter
ATGO to continue booting the system. For ATBAx, x denotes the number preceding the colon to give the
speed following the colon in the list of numbers that follow; e.g., ATBA3 will give a speed of 9.6 Kbps.
ATSE displays the seed that is used to generate a password to turn on the debug flag in the firmware. The
ATSH command shows product
model, RAS code revision, etc.
7-12
Menu 24 - System Maintenance
1. System Status
2. Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
Enter Menu Selection Number: 8
Figure 7-14 Command Mode
–
related information such as boot module version, vendor name, product
System Maintenance