Wi-Fi; Wireless Statement; Wireless Compatibility; Data Management - pts Diagnostics CardioChek Plus User Manual

Wireless Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to part 1 of the FCC Rules. These limits are
designed to provide reasonable protections against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. There
is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures.

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help

Wireless Compatibility


See Section III. Setup

Connecting to wireless requires additional setup specifications
Contact PTS Customer Service for additional information

Data Management

The CardioChek Plus Professional Analyzer is designed to connect to any
IEEE 802.11b, 802.11g, or 802.11n network which uses the WPA Personal
or WPA2 Personal network encryption schemes. The wireless module is
certified by the manufacturer to be compatible with wireless networking
standards established by the Wi-Fi alliance, to assure interoperability with
networking equipment. Contact your IT administrator for connection
assistance.
Note: If unable to run a test, wireless communication and patient ID lock
may be on. You will see a Wi-Fi symbol flashing. To run a test, send a new
patient ID to the analyzer, turn off wireless communication or press and hold
both buttons on your analyzer to override the patient ID lock.
VIII. Wi-Fi
for instructions on turning Wi-Fi on and off
37