Testing The Printer; How To Print Results From Memory - pts Diagnostics CardioChek Plus User Manual

Testing the Printer

1. If the analyzer is off, press either button to turn on the analyzer. Wait for
the display to read INSTALL MEMO CHIP or INSERT STRIP.
Note: If RUN TEST is displayed, go to Step 3.
2. Press Next. The display will read RUN TEST.
3. Press Next until SETTINGS is displayed.
4. Press Enter, then Next until PRINT is displayed.
5. Press Enter, then Next until TEST PRINTER is displayed.
6. Press Enter and a sample printout will be generated.

How to Print Results from Memory

Note: Up to 50 test results per chemistry and 10 control test results can be
stored.
1. If the analyzer is off, press either button to turn on the analyzer. Wait for
the display to read INSTALL MEMO CHIP or INSERT STRIP.
Note: If RUN TEST is displayed, go to Step 3.
2. Press Next. The display will read RUN TEST.
3. Press Next until MEMORY is displayed, then press Enter.
4. Press Enter to select CHEM or press Next, then Enter to select
CONTROL.
5. Press Next to highlight the test name, then press Enter to select (LIPIDS
for example).
6. Press Next to highlight the date/time of the test result you want to print.
7. Press Enter to print the selected results.
III. SETUP, continued
22