ZyXEL Communications Prestige 782M User Manual page 95

When you reboot your Prestige, you will be given a choice to go into debug mode by pressing a key at the
prompt shown in the following screen. In debug mode you have access to a series of boot module
commands, for example ATUR (for uploading firmware) and ATLC (for uploading the configuration file)
already discussed in a previous section.
Bootbase Version: V2.06 | 1/8/2002 11:34:40
RAM: Size = 8192 Kbytes
FLASH: Intel 8M
ZyNOS Version: V2.50(BM.0)b2 | 1/30/2002 19:58:46
Press any key to enter debug mode within 3 seconds.......
Type "ATHE" to view all available Prestige boot module commands. Some are shown in the next screen.
Most commands aid in advanced troubleshooting and should only be used by qualified engineers.
Boot Module Commands
Boot Module Commands
Diagram 3 Option to Enter Debug Mode
P782M G.SHDSL Bridge
Appendix C
C