Figure 5-2 Menu 11.6 - Remote Node Atm Layer Options; Table 5-1 Fields In Menu 11.6 - Remote Node Atm Layer Options - ZyXEL Communications Prestige 782M User Manual

Figure 5-2 Menu 11.6 — Remote Node ATM Layer Options
Refer to Chapter 3 for field descriptions found in the last figure.
The following table contains instructions on how to configure your Prestige for Internet access.
Table 5-1 Fields in Menu 11.6 — Remote Node ATM Layer Options
FIELD
VPI #
VCI #
Peak Cell Rate (PCR)
Sustain Cell Rate
(SCR)= 0
Maximum Burst Size
(MBS)= 0
When you have completed this menu, press [
your configuration, or press [
Remote Node TCP/IP Configuration
Menu 11.6 - Remote Node ATM Layer Options
VPI #= 8
VCI #= 38
Peak Cell Rate (cell/sec)= 5500
Sustain Cell Rate (cell/sec)= 0
Maximum Burst Size (cell)= 0
ENTER here to CONFIRM or ESC to CANCEL:
Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you.
This is the maximum rate at which the sender can send cells.
Type the PCR.
Sustained Cell Rate is the mean cell rate of a bursty, on-off
traffic source that can be sent at the peak rate, and a
parameter for burst-type traffic. Type the SCR; it must be less
than the PCR.
Refers to the maximum number of cells that can be sent at the
peak rate. Type the MBS. The MBS must be less than 65535.
ENTER
ESC
] at any time to cancel.
DESCRIPTION
] at the prompt "Press ENTER to Confirm..." to save
P782M G.SHDSL Bridge
EXAMPLE
8
35
0
0
0
5-3