Specifications - Makita DUN500W Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Blade length
Strokes per minute
Cutting blade angle
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended battery adapter
Battery adapter
• The battery adapter(s) listed above may not be available depending on your region of residence.
• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Do not expose to moisture.
Wear a helmet, goggles and ear protection.
Beware of pinching.
Beware of electrical lines, risk of electrical
shock.
Keep distance at least 15 m.
DUN500W
500 mm
2,000 / 3,600 / 4,400 min
115° (up 45°, down 70°)
2,115 mm
3.9 - 4.3 kg
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-4-2:
Model DUN500W
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
9 ENGLISH
DUN600L
600 mm
-1
–
2,050 mm
D.C. 18 V
3.7 - 4.1 kg
DC18SH
PDC01
) : 81.5 dB(A)
pA
) : 92.5 dB (A)
WA