Configuring Wan Backup; Figure 20Traffic Redirect Example; Figure 21Traffic Redirect Lan Setup - ZyXEL Communications P-660R-Tx v2 Series User Manual

Adsl2+ access router
Hide thumbs Also See for P-660R-Tx v2 Series:
Table of Contents

Advertisement

Figure 20 Traffic Redirect Example
The following network topology allows you to avoid triangle route security issues when the
backup gateway is connected to the LAN. Use IP alias to configure the LAN into two or three
logical networks with the ZyXEL Device itself as the gateway for each LAN network. Put the
protected LAN in one subnet (Subnet 1 in the following figure) and the backup gateway in
another subnet (Subnet 2). Configure filters that allow packets from the protected LAN
(Subnet 1) to the backup gateway (Subnet 2).
Figure 21 Traffic Redirect LAN Setup

6.8 Configuring WAN Backup

To change your ZyXEL Device's WAN backup settings, click WAN, then WAN Backup.
The screen appears as shown.
Chapter 6 WAN Setup
P-660R-Tx v2 Series User's Guide
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-660r-t1 v2P-660r-t2 v2P-660r-t3 v2

Table of Contents