ZyXEL Communications P-335WT User Manual page 264

P-335 Series User's Guide
Table 106 Main Menu Commands
OPERATION
Move the cursor
Entering
information
Required fields
N/A fields
Save your
configuration
Exit the SMT
After you enter the password, the SMT displays the main menu, as shown next.
263
KEYSTROKE DESCRIPTION
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field. You
[DOWN] arrow can also use the [UP]/[DOWN] arrow keys to move to the
keys. previous and the next field, respectively.
Type in or press You need to fill in two types of fields. The first requires you to
[SPACE BAR], type in the appropriate information. The second allows you
then press to cycle through the available choices by pressing [SPACE
[ENTER]. BAR].
?
< > or ChangeMe All fields with the symbol <?> must be filled in order to be
able to save the new configuration.
All fields with ChangeMe must not be left blank in order to
be able to save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.
[ENTER] Save your configuration by pressing [ENTER] at the
message "Press ENTER to confirm or ESC to cancel".
Saving the data on the screen will take you, in most cases to
the previous menu.
Type 99, then Type 99 at the main menu prompt and press [ENTER] to exit
press [ENTER]. the SMT interface.
Chapter 23 Introducing the SMT