Suunto ZOOP NOVO - Diving Instrument Quick Guide

ACTIVATE

1. Press [MODE] to wake updive computer.
   
2. Wait for software to initialize.
   
3. When time and date appear, continue with adjusting settings.
   

GENERAL SETTINGS

1. Keep [DOWN] pressed.
   
2. Scroll with [DOWN] or [UP] and enter with [SELECT].
   
3. Change with [DOWN] or [UP] and confirm with [SELECT].
   

CHANGE MODES AND VIEWS

Press [MODE] to change main mode: time, dive, plan and memory.

Change botton row views in any mode with [DOWN] and [UP].

CHANG DIVE MODE

The default dive mode is Air. If you want to use Nitrox, for example, change the mode under General Settings.

1. Enter General Settings.
2. Press [SELECT] to enter to Dive Modes.
3. Change to Nitrox with [UP].
4. Confirm with [SELECT].
5. Press [MODE] to exit.

The default dive mode is Air. If you want to use Nitrox, for example, change the mode under General Settings.

1. Keep [DOWN] pressed.
   
2. Press [SELECT] to enterDive Modes.
   
3. Change to Nitrox with [UP].
   
4. Confirm with [SELECT]
   
5. Press [MODE] to exit.
   

The next time you change to dive mode, Nitrox is used.

PLAN

1. Press [MODE] until you see PLAN NODEC.
2. Press [DOWN] or [UP] to scroll dive depths to check no decompress times.
3. Between consecutive dives, press [SELECT] to adjust surface time.
4. Press [MODE] to exit.

HISTORY

1. Press [MODE] until you see MEM.
2. Switch between History and Logbook with [DOWN] or [UP].
3. Press [MODE] to exit.

PARTS AND FEATURES

1. Current Depth
2. Daily Alarm Indicator
3. Dive Alarm Indicator
4. No-Fly Icon
5. Safety Stop Indicator
6. Date
   Dual Time
   Maximum Depth Time
   O₂ % (Nitrox)
7. Low Battery Warning
8. Seconds Display
   Stopwatch
   Weekday
   Dive Time
   Temperature
   PO₂ % (Nitrox)
   OLF% (Nitrox)
9. Ascent Rate Bar Graph
10. Time
    Mode Indicator
    No-Decompression Time
    Total Ascent Time
    Ceiling Depth
    Remaining Air Time
    Safety Stop/Deepstop Time
    Surface Interval Time
    No-Fly Time
    Stopwatch (Timer)
    Apnea Timer
    Tissue Saturation Graph
11. Diver Attention Symbol
    
12. Active Water Contact Indicator

SUUNTO CUSTOMER SUPPORT

1. www.suunto.com/support
   www.suunto.com/mysuunto
2. UK +44 20 3608 0534
   USA +1 855 258 0900
   CANADA +1 800 267 7506

Documents / Resources

References

• Customer support - Support and service for Suunto products
• Customer support - Support and service for Suunto products

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Suunto ZOOP NOVO - Diving Instrument Quick Guide