Advertisement
Available languages
Available languages
Quick Links
PACKAGE CONTENTS
A
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shad-
ed areas as these areas will not allow the batteries to fully charge and reduce
the nighttime operating hours for your light. Ensure that the installation location
is away from other nighttime light sources such as street or porch lamps. These
light sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries.
At night, the solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location,
daily weather conditions, and season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Attaching and installing the
solar panel and stake
NOTE: Do not use a hammer. If the ground is
hard, use water to soften or a trowel to loosen
the soil.
□
Insert the post (H) into the bottom of the solar
panel (D).
□
solar panel post (H).
□
Push the assembly into the ground.
D
H
I
B
C
2
Installing the mounting
ties to the LED rope.
NOTE: DO NOT PUNCTURE OR CUT THE ROPE
LIGHT.
□
Use the mounting ties (B) to tie the LED rope (A).
□
Mount the ties (B) on the surface you want with
screws (C).
□
Cut off excess ends of the mounting tie.
A
A
B
Use and Care Guide
D
E
Part
A
B
C
D
E
F
3.2V 1000mAh LiFePO4 (Model 18500)
G
rechargeable battery
H
I
C
B
C
1
Please contact 1-855-HD-HAMPTON for further assistance.
Item #1002 643 989
Model #84130
Solar LED Rope Light
G
F
H
Description
LED Rope
Mounting ties
Screws
Solar Panel
Battery Cover
Waterproof Cover
Post
Stake
3
Connecting the LED rope to
the solar panel.
□
Connect the LED rope light (A) to the
solar panel (D).
A
HAMPTONBAY.COM
I
Quantity
1
16
16
1
1
1
1
1
1
D
Advertisement
Related Manuals for HAMPTON BAY 84130
Summary of Contents for HAMPTON BAY 84130
- Page 1 Item #1002 643 989 Model #84130 Use and Care Guide Solar LED Rope Light PACKAGE CONTENTS PLANNING FOR A SUCCESSFUL ASSEMBLY Part Description Quantity LED Rope Read all instructions before assembly and installation. Mounting ties Inspect each part for defects that may have occurred during shipping.
- Page 2 Assembly and Installation (continued) Setting light mode FLASH □ Position switch on the solar panel (D) to your desired function. Maintenance Replacing the batteries CAUTION: When replacing the battery, use one (1) 3.2V 1000mAh LiFePO4 (Model 18500) rechargeable battery IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations.
- Page 3 Artículo núm. 1002 643 989 Modelo núm. 84130 Guía de uso y mantenimiento Cuerda de luces LED solar CONTENIDO DEL PAQUETE PLANIFICAR UN ENSAMBLAJE EXITOSO Pieza Descripción Cantidad Cuerda LED Lee todas las instrucciones antes de ensamblar e instalar. Amarres de montaje Tornillos Conserva el recibo y estas instrucciones como comprobante de compra.
- Page 4 Ensamblaje e instalación (continuado) □ Posición del interruptor en el panel solar (D) a su función deseada. FLASH Mantenimiento Cómo reemplazar las baterías PRECAUCIÓN: Al reemplazar la batería, utilice una (1) batería recargable de Litio de 3.2V 1000mAh LiFePO4 (Modelo 18500). IMPORTANTE: Desecha las baterías conforme con las regulaciones locales, estatales y federales.