Firmware Screen; Figure 55 Firmware Upgrade; Table 31 Firmware Upgrade - ZyXEL Communications ADSL2+ Ethernet/USB Gateway 660RU-Tx Series User Manual

12.6 Firmware Screen

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
.bin extension, for example, "Prestige.bin". The upload process uses HTTP (Hypertext
Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot. See
document the SMT for upgrading firmware using FTP/TFTP commands.
Click Firmware to open the following screen. Follow the instructions in this screen to upload
firmware to your Prestige.

Figure 55 Firmware Upgrade

The following table describes the labels in this screen.

Table 31 Firmware Upgrade

LABEL
File Path
Browse...
Upload
Reset
Note: Do not turn off the Prestige while firmware upload is in progress!
Chapter 12 Maintenance
Chapter 25 Firmware and Configuration File Maintenance
Note: Only use firmware for your device's specific model. Refer
to the label on the bottom of your device.
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
Click this button to clear all user-entered configuration information and return the
Prestige to its factory defaults. Refer to the Resetting the Prestige section.
Prestige 660RU-Tx Series User's Guide
in the parts that
116