Figure 20 Setup Wizard 2: Wireless Settings.
Click Next to continue, or Back to return to the Basic Settings screen.
4.4.3 Wizard: Security Settings
Use this screen to configure security for your wireless LAN connection. The screen varies
depending on what you select in the Encryption Method field. Select Disable to have no
wireless security configured, select WEP, or select WPA-PSK if your wireless AP supports
WPA-PSK.
In the Status page, go to Wireless > Security if you want to use WPA2, WPA or 802.1x. See
Chapter 6 on page 55
4.4.3.1 Disable
Select Disable to have no wireless LAN security configured. If you do not enable any
wireless security on your device, your network is accessible to any wireless networking device
that is within range.
Note: With no wireless security a neighbor can access and see traffic in your network.
Chapter 4 Introducing the Web Configurator
for background information.
G-470 User's Guide
45