The following table describes the front panel of the ZyXEL Device.
Table 1 The ZyXEL Device: Front Panel Lights.
LIGHT
STATUS
POWER The light is on.
The light is off.
STATUS The light is off.
The light is blinking orange.
LAN
The light is on.
The light is blinking.
The light is off.
WLAN
The light is on.
The light is blinking.
The light is off.
SIGNAL The blinking frequency of the SIGNAL light indicates the quality of the wireless signal.
The light is steady on.
The light is blinking once a second. Signal strength is between 60 and 79%.
The light is blinking twice a second. Signal strength is between 30 and 59%.
The light is blinking four times a
second.
The light is off.
Figure 4 The ZyXEL Device: Rear Panel
The following table describes the rear panel of the ZyXEL Device.
Table 2 The ZyXEL Device: Rear Panel Connections
LABEL
1
2
3
4
1.1.2 Application Overview
This section describes some network applications for the ZyXEL Device.
Chapter 1 Getting Started
DESCRIPTION
External antenna connector (R-SMA type)
Reset button
ETHERNET port
POWER socket
DESCRIPTION
The power is on.
The power is off.
The device is ready.
The device is not ready, or is rebooting.
Ethernet is connected.
Ethernet is connected, and is sending or receiving data.
Ethernet is not connected.
The device is connected to the wireless network.
The device is scanning for an access point (AP).
The device is not connected to the wireless network.
Signal strength is 80% or more.
Signal strength is below 29%.
The wireless network is not connected.
G-470 User's Guide
23