Chapter 9 Static Route; Overview; Configuration; Figure 75 Static Route: Network Example ] - ZyXEL Communications ZyXEL Prestige 794M User Manual

This chapter shows you how to set advanced system settings.

9.1 Overview

Each remote node specifies only the network to which the gateway is directly connected, and
the Prestige has no knowledge of the networks beyond. For instance, the Prestige knows about
network N2 in the following figure through remote node router R1. However, the Prestige is
unable to route a packet to network N3 because it doesn't know that there is a route through the
same remote node router R1 (via gateway router R2). The static routes are for you to tell the
Prestige about the networks beyond the remote nodes.

Figure 75 Static Route: Network Example ]

9.2 Configuration

Click Configuration, Advanced and Static Route in the navigation panel to display the
screen as shown.

Figure 76 Advanced: Static Route

The following table describes the labels in this screen.

Chapter 9 Static Route

Prestige 794M User's Guide
C
H A P T E R
Static Route
9
104