ZyXEL Communications ZyXEL Prestige 794M User Manual page 114

Table 60 Advanced: Device Management (continued)
LABEL
Expire to auto-logout
Universal Plug and
Play (UPnP)
UPnP Port
SNMP Access Control
SNMP V1 and V2
Read Community
Write Community
Trap Community
SNMP V3
Username
Password
Access Right
IP Address
Apply
Chapter 12 Device Management
DESCRIPTION
Type how many minutes a management web session can be left idle before
the session times out. The default is 3 minutes. After it times out you have to
log in again. Very long idle timeouts may have security risks.
A value of "0" means a management session never times out, no matter how
long it has been left idle (not recommended).
Select this Enable to activate UPnP. Be aware that anyone could use a UPnP
application to open the web configurator's login screen without entering the
Prestige's IP address (although you must still enter the password to access
the web configurator).
Select Disable to deactivate this feature.
Specify a port number for UPnP traffic. 2800 is the default.
Note: Make sure the port number is not already used by
another service.
Enter the Read Community, which is the password for the incoming Get and
GetNext requests from the management station. The default is "public" and
allows all requests.
Enter the IP address of the computer you want to allow to view the device
information in the IP Address field. Otherwise, lease this field to 0.0.0.0.
Enter the write community, which is the password for incoming Set requests
from the management station. The default is "password" and allows all
requests.
Enter the IP address of the computer you want to allow to view and modify the
device information in the IP Address field. Otherwise, lease this field to
0.0.0.0.
Type the trap community, which is the password sent with each trap to the
SNMP manager.
Type the IP address of the station to send your SNMP traps to in the IP
Address field.
Enter a username. The Prestige authenticates computer that wishes to obtain
device information with this name.
Enter a password for the username above.
Select Read to allow ready-only access. No information change is allowed.
Select Read/Write to allow information display and change.
Enter the IP address of a computer you allow to access the Prestige using
SNMPv3.
Click Apply to save the changes.
Prestige 794M User's Guide
114