Figure 69 Qos: Outbound Ip Throttling; Table 52 Qos: Outbound/Inbound Ip Throttling - ZyXEL Communications ZyXEL Prestige 794M User Manual

Prestige 794M User's Guide

Figure 69 QoS: Outbound IP Throttling

The following table describes the labels in this screen.

Table 52 QoS: Outbound/Inbound IP Throttling

LABEL
Application
Time Schedule
Protocol
Source Port
Destination Port
Source IP Address
Range
Destination IP
address Range
99
DESCRIPTION
Enter a descriptive name for identification purposes.
Specify when this rule is active. Select Always On to activate the rule all the
time. Otherwise, select a schedule (that you configure in the Time Schedule
screen).
Select a protocol type from the drop-down list box. Choices are any, tcp, udp,
icmp and gre.
Enter the source port number from which traffic travels.
Enter the destination port number to which traffic travels.
You can set the Prestige to prioritize traffic from specified source IP
address(es).
Specify one or a range of source IP address(es). Leave the fields as 0.0.0.0 to
prioritize packets from any source IP address.
You can set the Prestige to prioritize traffic to specified destination IP
address(es).
Specify one or a range of destination IP address(es). Leave the fields as
0.0.0.0 to prioritize packets from any destination IP address.
Chapter 8 QoS (Quality of Service)